Required Dimensions

To make your plates we must have full and clear instructions, beginning with the type of metal you want them made of (Brass, Aluminium)

Where scale models are concerned, the first thing we need to know what scale was used to design the miniature version. For more on this, click HERE

For plates that are NOT following a scale prototype, click HERE for some advice on choosing the right size.

Below is a list of dimensions and details that we need to know:

Copy the relevant shape section below, paste it into an Email and then fill in your dimensions.


Square or Oblong Plates


A. Overall Length of plate ____________

B. Overall Width (Height) of plate___________

C. Overall Thickness of Material ____________

D. Depth of Relief or Engraving _____________

E. Radius of Inner Border Corners____________

F. Radius of Outer Edge Corners _____________

G. Width of Border between Inner and Outer Edges_____________

H. Lettering Style (Font, Type face Etc.) _______________

I. Colour of Enamelling required____________ (To see our 'Colours' page, click HERE)


Circular or Toroidal Plates


A. Overall Diameter of plate ______________

B. Diameter of Centre Hole (if required) ______________

C. Overall Thickness of Material ______________

D. Depth of Relief or Engraving ______________

E. Width of Border between Inner and Outer Edges of Outer Border ______________

F. Width of Border between Inner and Outer Edges of Inner Border ______________

G. Lettering Style (Font, Type face Etc.) ______________

H. Colour of Enamelling required ______________ (To see our 'Colours' page, click HERE)


Oval Plates



A. Overall Length of plate ______________

B. Overall Width (Height) of plate ______________

C. Overall Thickness of Material ______________

D. Depth of Relief or Engraving ______________

E. Width of Border between Inner and Outer Edges of Outer Border ______________

F. Width of Border between Inner and Outer Edges of Inner Border ______________

G. Lettering Style (Font, Type face Etc.)

H. Colour of Enamelling required ______________ (To see our 'Colours' page, click HERE)


Curved or any other Shape Plates


The best way to deal with these would be to send us a Drawing.
You will know the kind of information required from the details above.

Don't forget to include;

A. Overall Thickness of Material ______________

B. Depth of Relief or Engraving ______________

C. Lettering Style (Font, Type face Etc.) ______________

D. Colour of Enamelling required ______________ (To see our 'Colours' page, click HERE

E. Curved 'Splasher' style plates can only be made using at least one radius taken from the actual model.

For more help on radius measurement, click HERE